DH150-B Auto Bussing Machine

DH150-B Auto Bussing Machine



1. DH150-B Auto Bussing machine can complete both ends busbar welding of center outlet lines symmetrical type of half cell module, or it can be used independently to complete the busbar preparation of the standard type and double glass type of the full cell, the welding of interconnecting busbar and the preparation, cutting and placement of EPE film.

2. Rolled busbar feeding, L busbar automatic lapping and welding.

3. Automatically complete the cutting and placement of EPE block film and lEPE long bar insulation film.

4. Flux can be sprayed automatically on the welding area before welding.

5. The feeding device of the busbar and the flux insulation film are all on the same side of the machine

6. Rotating arm operation computer, convenient and quick

7. The glass can be transported in both directions according to the requirements of the production line, without affecting the normal welding function



Overall size 

Length×width×height: 6203×3777×2557

Production capacity 

150 panel/hour

Welding method 

Electromagnetic induction welding 

Cell specifications 



Cell thickness


Module specifications 

Length (1630-2250)mm×Width(800-1100)mm 

B1(normal)、B2(double glass)、B3(double side B) 

Glass specifications



Busbar specification 

Roll feed, thickness 0.25-0.35mm, width 4, 5, 6, 8mm

EPE film specifications

Rolled busbar feeding, thickness ≥200μm,

Wide film width 70mm, narrow film width 30mm

Module input and output height


Gas source

Pressure: 0.6-0.8MPa; Flow rate: 1.8m³/min;

Main pipe specifications: inner diameter φ12/outer diameter φ16

power supply

Voltage: Three-phase (three-phase five-wire) 380V/220V Frequency: 50-60Hz 

PowerPeak 32KW Average23KW 

Environment temperature


Related Product

Chat with us