DH150-A Auto Bussing Machine

DH150-A Auto Bussing Machine

Description

2.jpg

1. DH150-A Auto Bussing machine can automatically complete the busbar interconnection welding work in the middle of half-cell module, including the cutting and bending of the busbar and the welding of the ribbon and busbar.


2. Vacuum suction grabbing, welding in mid air.


3. Position correction for 12 strings.


4. rolled busbar feeding, automatically prepared and bending to L busbar.


5. Flux can be automatically added.


6. Rotating arm operation screen, convenient and quick.


7. The glass can be transported in both directions according to the requirements of the production line, without affecting the normal welding function.


Item

Parameter 

Overall size

Length×width×height: 5450×3673×2185

Production capacity

150 panel/hour 

Welding method 

Electromagnetic induction welding 

Cell specifications

156mm×156mm/5BB(12BB)---

170mm×170mm/5BB(12BB) 

Cell thickness

160μm 

Secondary calibration accuracy 

±0.3mm 

Module specifications 

Length(1630-2250)mm×Width(800-1100)mm;

Center line right-angle bending type

Glass specifications

1642mm×984mm(156cells) ;

 2250mm×1110mm(170cells)

Busbar specification

Rolled busbar feedingThickness 0.25-0.35mm, width 4, 5, 6, 8mm

Module input and output height

950±20mm 

Air source

Pressure: 0.6-0.8MPa; Flow: 1.5m³/min; Specification of main pipe: inner diameter φ12/outer diameter φ16

Power supply

Voltage: Three-phase (three-phase five-wire) 380V/220V Frequency: 50-60Hz; Power: peak value 15KW average 7KW

Environment temperature  

10-40℃ 

 


Related Product

Chat with us